Cross Fire Glass Furnace-Uniform Heating, Batch Processing, Glass Quality

The regenerators, port necks and burners are positioned laterally. A separate chamber (sectional regenerators) together with an independent flue gas reversal system can be designed for each port neck. This ensures precise control of the furnace temperature over the entire length of the melting furnace. Often the flue gas from multiple port necks or even from all port necks is discharged via one chamber for cost reasons.

In case of environmental restrictions in respect to NOx emissions, this furnace type can be equipped with sideport burners in place of underport burners. Due to limited adjustability and port width, more ports are generally required. Because of the higher number of ports usually one or two regenerators are built on each side of the furnace in this case.

The regenerator chambers can be equipped with different checker types and qualities according to the position of each port. This facilitates the implementation of a furnace suitable for the raw materials used, with a long life and achieving the perfect melting process. A weir wall built into the bottom of the melting end, which is also called barrier, and a deep refining part increase the flexibility and glass quality.

This furnace type can be also equipped with electric boosting in order to increase melting capacity and flexibility.

1. Furnace capacity up to 750 t/d

2. Easily adjustable temperature profile

3. High flexibility in case of load change

4. High specific melting output

5. Low energy consumption

6. Low emission values

7. Long life