0102030405
China Cross Fire Glass Furnace - Optimal Uniform Heating, Superior Glass Quality | Trusted Suppliers & Factory
Description
The regenerators, port necks and burners are positioned laterally. A separate chamber (sectional regenerators) together with an independent flue gas reversal system can be designed for each port neck. This ensures precise control of the furnace temperature over the entire length of the melting furnace. Often the flue gas from multiple port necks or even from all port necks is discharged via one chamber for cost reasons.
In case of environmental restrictions in respect to NOx emissions, this furnace type can be equipped with sideport burners in place of underport burners. Due to limited adjustability and port width, more ports are generally required. Because of the higher number of ports usually one or two regenerators are built on each side of the furnace in this case.
The regenerator chambers can be equipped with different checker types and qualities according to the position of each port. This facilitates the implementation of a furnace suitable for the raw materials used, with a long life and achieving the perfect melting process. A weir wall built into the bottom of the melting end, which is also called barrier, and a deep refining part increase the flexibility and glass quality.
This furnace type can be also equipped with electric boosting in order to increase melting capacity and flexibility.
Features
1. Furnace capacity up to 750 t/d
2. Easily adjustable temperature profile
3. High flexibility in case of load change
4. High specific melting output
5. Low energy consumption
6. Low emission values
7. Long life
Frequently Asked Questions
Q:
What is the maximum melting capacity of this furnace?
The furnace features a high specific melting output, with a capacity reaching up to 750 t/d.
Q:
How is precise temperature control maintained in the melting furnace?
Precise control of the furnace temperature is ensured by positioning the regenerators, port necks, and burners laterally. Additionally, a separate chamber (sectional regenerators) along with an independent flue gas reversal system can be designed for each port neck.
Q:
How does the furnace adapt to strict environmental NOx emission limits?
To meet environmental restrictions on NOx emissions, this furnace type can be equipped with sideport burners instead of underport burners.
Q:
What is the benefit of installing a weir wall at the bottom of the melting end?
A weir wall (also known as a barrier) built into the bottom of the melting end, combined with a deep refining part, increases both the operational flexibility and the overall glass quality.
Q:
Can the melting capacity of this furnace be further upgraded?
Yes, this furnace type can be equipped with electric boosting to increase its melting capacity and operation flexibility.